Datalogger PCE-313 S

Humidity logger for humidity and temperature of internal measured value memory via SD-card (1... 16 GB) / data interface to the online transfer / battery or mains operation possible / additional K type thermocouple connector

This humidity logger is intended for professional use in the climate measurement technology. The humidity logger determines also the room temperature as well as the relative humidity. Type-K thermocouple connection, you have the option of using an optional surface probe, to determine E.g. wall temperature in addition. The internal data memory to the humidity logger on SD card (1... 16 GB), allows a recording of humidity - and temperature readings at freely selectable measurement rate in direct mode or as a long time logger data logger mode. This, you can advance program the humidity logger from the keyboard or preset, and then make a time lapse photo spot (without being itself constantly present). For long exposures, it is advisable to operate (optional) the humidity logger with a power supply. The recorded values can transfer again feature in the data logger - to the PC and are evaluated (.xls file on the SD card). You can also check the columns of numbers on runaways, or create a graph in Excel program.

This version with sintered CAP is equipped for use in extremely humid environments. Through this exclusive in-house production in-house, the probe was equipped with this sintered CAP, which ensures the smooth operation under such extreme conditions without significant reading delays. The sinter CAP is of course removable for control, cleaning and calibration co-tels of our calibration kits. The figure on the right shows the sensor with sintered Cap.

There is a calibration set available for the humidity logger PCE-313 S additional. All moisture sensors tend over time to the drifting, so also in this model. To counteract the physical property and to obtain more accurate readings, the moisture Analyzer with two standards can be checked regularly. The standard humidity values of the Chambers be 33% and 75% relative humidity. The calibration procedure can run by untrained people.

Features

-measures temperature, humidity, dew point and external temperatures in excess of the

Thermocouple connector Type-K

-flexible internal real time (real time) data storage via SD memory card  (1 ... 16 GB)

-the stored data is stored directly as Excel-file on the SD card

-the SD card can be formatted in the device

-Data-hold function

-external sensor for measurement of the environment simple and flexible

-Low Batt indicator

-large LC display with simultaneous display

-Tripod connection

-adjustable measuring rate of 1... 3600 seconds

-easy to use

-durable housing

-2 GB SD card and card reader included

-optional software kit for online transfer to the PC or laptop (for evaluation of)

No software is required data)

Scope of delivery

1 x humidity logger PCE-313 S, 1 x combined temperature and humidity sensor with sintered CAP, 1 x SD card (2 GB), 6 x battery, 1 x user manual